355*28mm Cast Iron Brake Disc With Alloy Center Bell Bracket

355*28mm Cast Iron Brake Disc Brake With Alloy Center Bell Bracket

How many kilometers does the Cast Iron Brake Disc have to be replaced

There is no exact replacement time cycle for the brake disc. In fact, the time for replacing the brake disc is mainly to judge whether it needs to be replaced from the actual wear of the brake disc. Generally, the brake discs of vehicles are marked with the service limit thickness. Every time they go to the store for maintenance, the technician will measure the thickness of our brake discs to see if they are worn to the service limit. If they reach the service limit, they should be replaced.

Of course, the owner's friends can also predict through some of their driving habits. For example, if they use the brakes more frequently, or habitually step on the brakes, then when the car travels 50000 or 60000 kilometers, the brake disc may need to be replaced. Car owners have good braking habits. If they don't slam on the brakes at ordinary times, the mileage of the brake disc may be extended by half.

It is also worth noting that every time you replace the brake pads, you need to replace the brake disc! This is a conventional experience and a general basis for judging the replacement time of brake disc. In addition, when the brake disc fails, it also needs to be replaced. For example, when stepping on the brake while driving, the steering wheel shakes, which may be caused by the deformation of the brake disc, so a new brake disc needs to be replaced. Of course, the most professional judgment is to determine whether the brake disc needs to be replaced by professionals according to the actual thickness of the brake disc.

What are the precautions for the brake disc?

1. Pay attention to reducing the wear of the brake disc. Although the wear of the brake disc is slower than that of the brake pad, the technicians of the general automobile repair shop will only prompt to replace the brake pad and brake oil, but the brake disc will wear after using a certain mileage. The brake disc surface is uneven or the brake disc thickness does not meet the standard, which will seriously affect the braking performance.

2. Pay attention to abnormal brake noise. Because the material formula is different and the use conditions are different, it is normal to have "hissing". However, ordinary civil vehicles should pay attention to the abnormal braking noise of "hissing". The owner shall pay attention to cleaning the brake pads and brake discs, reduce the entry of foreign matters into the brake system, and replace the qualified brake pads.

3. Pay attention to protect the brake disc when washing the car. When preparing to wash the car, it is recommended to cool naturally before washing the car for maintenance. Because in our daily brake use, due to the deceleration friction of the vehicle, the brake disc will produce a lot of heat and the temperature will be very high.